Posts Tagged ‘navigator’

Exmark Navigator: A Dedicated Bagging System Designed for Lawn Care Pros

Wednesday, April 17th, 2019

One big concern for professional mowing operations is what to do with all the grass clippings? If you give your customers the choice of bagging or mulching, you end up needing to do both, which means you have to clear them away and deal with them later. If you only bag and remove clippings, you could end up dealing with hundreds of pounds of waste at the end of every day. A mower like the Exmark Navigator with its dedicated bagging system and patented fill reduction can help solve the clippings problem.

Navigator’s Dedicated Bagger

Whether you choose the 42” or the 48” Navigator, it comes with a 76-gallon capacity bagger – and an optional powered dump attachment system, so you can empty faster, with less effort, and get back to bagging. We used an exclusive baffle design to fill the bag evenly from front to back, so you can mow more efficiently on large lawns, and may not need to empty the bag between small lawns.

Navigator delivers manicured lawns that satisfy the sort of person who would pick up a stray clipping with tweezers. That’s because the larger diameter blower generates more airflow, allowing Navigator to collect more clippings and debris.

Thorough clipping collection and bagging is especially important if the lawns you mow have fungal diseases like red thread, rust diseases, or brown patch. Mulching may spread the fungal infection to health areas of the lawn.

Sometimes You Bag, Sometimes You Mulch

When you mulch, the higher blade tip speed slices grass clippings into finer particles, for better distribution. With Navigator, clippings blend into the lawn rather than leaving unsightly clumps of drying grass. The patented fill reduction system lets you adjust how much of the clippings get bagged. You can easily adjust to mulch none, 67%, or 100% of clippings. Partial mulching will help maintain the manicured lawn look customers demand, while delivering nutrients to the lawn; it will also reduce the volume of clippings you deal with at the end of the day, especially during high growth seasons like spring and fall.

Targeted Center Discharge During Mulching

Navigator’s center discharge deck with dual-sided trimming means precise clipping control, so that flower beds, sidewalks and driveways don’t end up covered with clippings.  Navigator saves you time over side-discharge mowers, where you may end up have to blow or sweep clippings off pavements and sidewalks.  When bagging 100% of clippings, that larger diameter blower means you won’t have to tidy up what the bagger didn’t catch.

The Exmark Navigator

Navigator’s dedicated bagging system benefits can be enhanced with a range of accessories, including dump tubs, powered dump, an automated door opener kit, and a micro-mulch system.  With mowing speeds of up to 7 mile per hour, it will be no surprise if you find your operation mowing more productively and neatly than before.

Ready to find out if Navigator is the mower your business needs? Talk to your Exmark dealer.

Exmark Advantage: Hydro Drive System

Wednesday, March 23rd, 2016

Exmark Pioneer S-Series zero-turn mower

Exmark hydro drive systems deliver increased reliability, durability and ease of use for landscape professionals and homeowners alike.

The heart of any zero-turn mower is the hydro drive system. It’s the system responsible for controllably putting the power to the ground — undoubtedly an important job.

That’s why Exmark has worked hard to develop innovations that make its hydro drive systems function better, more reliably, with increased long-term durability. Working in partnership with Parker, we designed a unitized pump and motor unit that eliminates all hoses, fittings and potential leak points.

In testing, the Exmark UHT drive system in combination with Exmark Premium Hydraulic Oil has been proven to operate in the toughest commercial conditions while maintaining cooler system temperatures than the “off the shelf” hydro drive systems used by other manufacturers.

Exmark UHT hydro drive system

The UHT hydro drive system on Lazer Z zero-turn riders is designed to work harder, stay cooler and last longer than other hydro drive systems.

With no hoses and fewer parts to wear out, Exmark drive systems are more durable and easier to maintain than traditional drive systems. In fact, with proper preventative maintenance and care, the UHT hydro drive system on an Exmark Lazer Z can deliver 3,000 hours or more of productive mowing. That’s durability you can count on for years to-come!

Features of the Lazer Z UHT hydro drive system include:

UHT Hydro – 16cc

  • Used on Lazer Z X-Series with 60″ and 72″ Cutting Decks
  • Pump: Parker 16cc
  • Type: Axial piston
  • Displacement: 16.0 cc/rev
  • Motor: Parker
  • Type: Gerotor
  • Displacement: 280 cc/rev
  • Peak Torque: 684 ft.lb
  • Reservoir: 2 quart integral

UHT Hydro – 12cc

  • Used on Lazer Z E-Series, Lazer Z S-Series and Lazer Z X-Series with 48″ and 52″ Cutting Decks
  • Pump: Parker 12cc
  • Type: Axial piston
  • Displacement: 11.4 cc/rev
  • Motor: Parker
  • Type: Gerotor
  • Displacement: 240 cc/rev
  • Peak Torque: 684 ft.lb
  • Reservoir: 2 quart integral

Learn more about the advantage of Exmark hydro drive systems at Exmark.com/Exmark-Advantage/Features/Hydros.

 

 

Spring 2016 Special Offers from Exmark

Sunday, February 21st, 2016

This is the time of year when a lot of folks are starting to think about warmer weather and getting out into the yard. For those looking to upgrade their equipment this season, Exmark has a number of special offers that can make it easier than ever to put the best mowers and lawn care equipment in your garage.

For a limited time, put that new Lazer Z you've always wanted into your garage for as little as $8,499.

For a limited time, put that new Lazer Z you’ve always wanted into your garage for as little as $8,499 MSRP. (Dealer sets final retail price. Shown with available accessories: MSRP $10,071.99.)

The Lazer Z E-Series is one of our most popular commercial zero-turn riding mowers. For a limited time, you can save up to $1,100 on select Lazer Z E-Series models. For example: you can take home a 52-inch Lazer Z E-Series machine (LZE732GKC524A2) for an MSRP of just $8,499, or a 60-inch model (LZE742GKC604A3) for $8,999. Visit your local Exmark dealer today to learn more or to schedule a demo.

We’re also offering rebates on select Exmark mowers, including:

  • $1,000 instant rebate on Navigator riding mowersexpires April 30, 2016 
  • $600 instant rebate on Pioneer E- and S-Series mowersexpires June 30, 2016
  • $500 instant rebate on Vantage stand-on riding mowers — expires June 30, 2016
  • $100 instant rebate on Commercial 21 walk-behind mowers — expires June 30, 2016

Visit Exmark.com/Special-Offers to see these and other special offers on Exmark machines available for a limited time.

Finance Options

Exmark Commercial 30

Step up to full commercial performance and get a $100 instant rebate when you buy the popular Commercial 21 walk-behind mower through June 30, 2016.

Exmark partners with several national lenders to offer customers financing with very competitive terms. See your local Exmark dealer for full financing details, but some examples of financing offers currently available through our lending partners include:

  • 0% monthly interest for 42 months on purchases of $1,500 or more with your Exmark card — On Purchases of $1500 or more on Exmark Equipment with your Exmark credit card made between now and 04/30/2016. A $125 Promotion Fee will be charged. 42 Equal Monthly Payments required.
  • No monthly interest if paid-in-full within 12-months — On qualifying purchases of $400 or more with your Exmark credit card made between now and 04/30/2016. Monthly interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 Months. Minimum Monthly Payments required. A $50 Promotion Fee will be charged.

See full details and disclosures for these and other financing offers at Exmark.com/Special-Offers (click “View Financing Options”).

 

The Importance of Keeping Mower Blades Sharp

Thursday, March 26th, 2015

At Exmark, we understand the importance of making sure your lawnmower is in tip-top shape in preparation for the upcoming landscaping season. One of the top maintenance items for any rotary mower is to ensure blades are properly sharpened, balanced and in good working order.

Exmark blades

Sharp, balanced blades are an essential component of cut quality. Exmark offers a variety of blades to optimize performance for different cutting conditions.

Why Sharp Blades Matter

When you are shaving your face in preparation for the day, think about the difference between the times you use a brand-new razor blade and the times you are trying to get one last shave out of an old blade. When using an old blade, your skin is more prone to cuts, infection, and irritation. When using a brand-new blade, you get a nice, clean shave.

The same thing happens with your grass. If the blades are dull or nicked, the lawn will get cut in a ragged way, causing it to suffer damage and become more susceptible to pests and other diseases. But if the blades are nice and sharp, the grass will get a clean cut, with greatly reduced damage or stress.

Blade Inspection

Mower Blade

Inspect and sharpen or replace mower blades at the start of each cutting season.

At the beginning of the landscaping season (and after roughly 8-10 hours of service) do a thorough inspection of your mower’s blades. Signs of a dull blade include bends, nicks, and/or dents. You’ll want to ensure the blades are properly sharpened and balanced. In addition to the physical inspection of the blades, do a quick inspection of the lawn before you begin your landscaping — clear away any rocks, sticks, or other debris in the immediate area. As you mow, keep an eye out for these blade-nicking items.

Properly Sharpening Your Blades

Keep in mind these few basic tips for sharpening your blade:

  • Wear protective gear, such as safety glasses
  • Disconnect the spark plugs
  • Remove the blade (instructions are found in your owner’s manual)
  • Use a metal file or sharpening stone
  • If using a file, run it in the direction of the blade’s angle — never file back and forth
  • Work in one direction only; blades usually have an angle of 45 degrees
  • Consult your owner?s manual for procedures specific to your mower

Depending on usage, replace your lawn mower’s blade(s) every 1-3 years. Always use OEM blades designed for your specific mower. Universal blades may save you a couple dollars, but can cause potential safety issues from improper mounting and/or the type of metal used to construct the blade.

Properly Balancing Your Blades

Having properly balanced blades is every bit as important as blade sharpness. An unbalanced blade causes stress on the engine and cutting deck due to vibration.

After you sharpen the blade, test its balance with a blade-balancing tool. If you don’t have access to this specialized tool, you can hammer a nail partway into a wall in your garage and hang the blade from it (using the center hole). If the blade hangs horizontally, it is in balance. If one side drops, remove excess material from the side it leans to, using a file or sharpening stone.

Professional Sharpening

If you follow these recommendations and have the proper tools and safety gear on-hand, sharpening your blades is a relatively easy task. However, if you don’t have the proper gear, or don’t feel comfortable doing this type of maintenance yourself, your local Exmark dealer can quickly sharpen and balance blades for you.

Bottom line: using sharp blades will help you have a perfectly mowed lawn, every time.

Resources:

Exmark Introduces New Accessories for Navigator

Thursday, January 8th, 2015

Available rotary broom and powered hopper lift options increase ease-of-use, multi-season utility

Exmark has expanded the accessories available for the Navigator dedicated bagging riding mower to include a rotary broom attachment, as well as a powered hopper lift system. The new accessories increase productivity and versatility for professional landscape contractors.

The powered hopper lift makes it incredibly easy to dump clippings from the Navigator's hopper.

The powered hopper lift makes it incredibly easy to dump clippings from the Navigator’s hopper.

“When we redesigned the Navigator in 2013, one of our goals was to make the machine easier to operate,” said Exmark Director of Marketing, Daryn Walters. “The powered hopper lift option gives Navigator operators the ability to empty a full load of clippings at the touch of a finger. Nothing could be easier.”

In addition to the powered hopper lift system, Exmark has also introduced a rotary broom for the Navigator. This not only increases the machine’s versatility during the cutting season, it expands the potential uses for the Navigator well beyond the cutting season.

According to Exmark Parts and Accessories Marketing Manager, Mark Aldendifer, the rotary broom is designed to perform in a variety of applications, from thatch reduction to snow removal, thanks to two available brush materials.

“Versatility is the name of the game with the Navigator rotary broom attachment. It is shipped with the heavy-duty black bristle set – optimal for snow and general debris removal. We also offer an optional yellow turf bristle set, which has been optimized for dethatching operations.”

The Navigator rotary broom allows angle adjustment of 20-degrees left or right, quickly from the driver’s seat.

The rotary broom attachment expands the usefulness of the Navigator well beyond the cutting season.

The rotary broom attachment expands the usefulness of the Navigator well beyond the cutting season.

A factory-authorized aftermarket accessory, Exmark partnered with M-B Companies, Inc. for manufacturing and sales of the Navigator rotary broom. The system requires installation of a quick hitch (sold separately). Once dealer installation of the quick hitch is complete, the rotary broom fits-up quickly without tools.

The Navigator’s large 9.5-bushel collection hopper increases productivity by allowing operators to spend more time mowing and less time managing the hopper. To further increase the productivity of the Navigator, Exmark developed an exclusive fill-reduction system, which increases the versatility of the machine by allowing the operator to quickly and easily switch from dedicated bagging to fill-reduction mode (30 percent bagging, 70 percent mulching), or 100 percent mulching.

Exmark offers the Navigator with a choice of 42- or 48-inch cutting decks. The floating design precisely tracks ground contours to virtually eliminate scalping. Patented flow-control baffles and a large-diameter blower allow the Navigator to generate massive airflow for increased vacuuming action and a superior, manicured quality of cut.

The 4 5/8-inch deep cutting deck features a rear-discharge design for superior clipping flow-through, reduced noise and the ability to trim on both sides of the deck. Constructed of high-strength welded steel, the Navigator cutting deck also features heavy-duty gear-driven spindle assemblies to deliver superior reliability and long-term durability.

The Navigator features Exmark’s FeatherTouch controls, which deliver smoother, more precise control for effortless maneuvering, even in tight spaces. Updated to reduce control force and provide a more consistent feel throughout lever travel, the FeatherTouch controls are easy-to-operate and offer an increased range of adjustment to precisely fit a wide range of operator sizes.

Two powerful Kohler engine options are available for the 2014 Navigator, including the CH640 Command V-twin, and the ECH730 Command EFI V-twin with Electronic Fuel Injection (EFI). Both engines feature heavy-duty cyclonic air filters and a Lazer Z-style hour meter module and harness for improved on-board diagnostics.

The Navigator features Superior Gear gearbox assemblies with spiral-bevel cut gears for quiet operation. Each gearbox is independently sealed to prevent cross-contamination or loss of lubricant, and Exmark engineers use 3/8-inch hardware to connect all gearboxes and shaft tubes for increased reliability and strength. Additionally, Premium Timken tapered roller bearings are used to ensure superior durability and long life.

The new accessories join a long list of productivity and versatility enhancing accessories for the Navigator, including:

  •  Custom suspension seat
  •  48-inch snow blade
  •  44-inch snow blower
  •  Mulching kit
  •  Light kit
  •  Dump Tubs

Learn more about the 2014 Exmark Navigator or find the nearest authorized Exmark dealer at Exmark.com, or call (402) 223-6300.

New Rebates Financing Options from Exmark…

Monday, March 10th, 2014

If you’re thinking about new equipment but have been waiting for just the right time, take a look at the new rebates and financing options Exmark is offering for a limited time. The offers can make it easier than ever to put that new Exmark mower you’ve been looking at into your garage.

Rebates Make Owning the Best Easier

Exmark is offering a $1,000 instant rebate off suggested commercial sale price on 2014 Navigator riders. Now you can own the world’s best dedicated bagging rider at a steal of a price!

A $1,000 instant rebate makes owning an Exmark Navigator even easier.

A $1,000 instant rebate makes owning an Exmark Navigator even easier.

In addition to rebates on the Navigator, Exmark is giving buyers of 2014 Vantage X-Series and Vantage S-Series stand-on mowers a $500 instant rebate off suggested commercial sale price. Mow with the best for less, but only for a limited time, so hurry!

Both rebates are available on new purchases from March 1, 2014 through May 31, 2014. Visit the Exmark Current Offers web page for important rebate details, then get in to your local Exmark dealer for a demo. It’s time to mow!

Zero- and Low-Interest Financing Programs

The first offer is 0% monthly interest on purchases of $400 or more, for up-to 42 months. Two programs are available, depending on whether you’re looking for a revolving- or installment-type program, so please visit the web page to learn more.

If you’re looking for the absolute lowest payment, this next program is for you. Take up to 60-months to pay with just 3.99% interest. There’s no penalty for early repayment. You can pay in installments, or in full, when you choose.

Here’s Exmark Financial Services Manager, David Adams talking about the new programs on YouTube:

Visit the Exmark Current Offers web page for complete details or all current rebate and financing options.

May Days are Here!

Tuesday, May 10th, 2011

May Days Sales Event

Announcing our first ever May Days Sales Event. If you were looking for a time to buy a new Exmark mower, here’s your chance. For a limited time, we’re offering no interest and no payments for 6 months, or 0% APR financing for 36 months*.

Check out these great deals on our best-selling commercial and resident mowers including:

Hurry to your Emark dealer from May 12th – 22nd for the May Days Sales Event. For a full list of details on this and all our current promotions, click here or visit your local dealer.

Will you be taking advantage of our first ever May Day Sales Event? Let us know with a comment below.

* No payment required. No interest accrues until the end of the 6-month ‘No interest’ term at which time it accrues at 3.99% for 36 months.

How-to Buy Your Next Exmark Mower

Thursday, February 10th, 2011

Here’s a post for the Exmark newbies.  As you prepare to purchase your next mower in 2011, we want you to be informed and prepared. So we’ve put together a short guide to help you pick out the right Exmark mower for the job. You’ll want to meet with your local Exmark dealer as well, but this will at least get you headed in the right direction.

Budget

The first thing you want to keep in mind, when purchasing your new Exmark, is your budget. You need the most dependable and durable mower that you can afford. Exmark has many mowers to suit any budget or mowing needs. Interested in learning how you can finance your next Exmark retail mower? David Adams, Exmark Financial Services Manager, explains the process in our latest YouTube video.

Mowing properties

The next thing you’ll want to consider, is what kind of properties you’ll be mowing. Smaller residential lawns require smaller mowers like the new 36″ Vantage or Commercial 21, but for larger commercial properties you’ll want to go with a zero-turn mower like the Lazer Z.

For properties under a 1/2 acre we’d recommend:

  • Vantage
  • Commercial 21
  • Metro
  • Viking
  • Turf Tracer

For properties above a 1/2 acre, we’d recommend:

  • Quest
  • Pioneer
  • Navigator
  • Lazer Z

Mower Engine and Features

After you’ve considered your budget, lawn size and terrain, you’ll want to look at your next Exmark mower for the engine and features offered. All Exmark models come with a variety of engine types and configurations (including eco-friendly models) and mower accessories (like mulching and striping kits). Still not sure what you’d like?  You can check out the “Not Sure What to Buy” section of exmark.com or the Compare Mowers section here.

Need any additional help? Have specific questions about a mower your considering for 2011?  Let us know in a comment below.

2011 EFI Units

Tuesday, December 14th, 2010

This year was a big one: we introduced a number of new units at GIE+EXPO, including the Pioneer Series and the new Vantage. We also introduced five new energy efficient units for 2011.

Energy efficiency is an important and growing area of focus for the landscaping industry. We believe it is part of our responsibility at Exmark to provide landscape professionals with the option of selecting an energy efficient mower when they make a purchase.

Here’s a look at the new Electronic Fuel Injected (EFI) units for 2011 – all designed to cut fuel and save you money.

The entire fleet of EFI units features a state-of-the-art Kohler PRO EFI engine, which is the industry’s first closed loop fuel injection system. These new engines can allow the units to consume up to 25 percent less fuel than a standard carburetor-powered mower for savings that really add up over time.

What do you think of the new 2011 EFI units? Do you own an EFI unit? Tell us about it in the comments section.

Leaf removal – the sequel.

Tuesday, November 23rd, 2010

So we asked, and we received. In our last leaf removal post, we asked you to share some of your favorite tips and techniques with us on leaf removal. We’re glad to say we got quite a few responses – some creative, some pretty funny and others that we could see coming in quite handy. Thanks to all who shared!

And, rather than just picking one – we decided to go with a few of our favorites:

Mitch

I own an Exmark Turf Tracer HP. Usually I blow all the leaves out of the flower beds onto the lawn with my blower. Then I mow the lawn two to three times to mulch up the leaves. The mower is designed so well, it acts like a very powerful vacuum, sucking up the leaves and shredding them into tiny pieces! It doesn’t miss any leaves and I’m just using the normal Exmark blades. After I mow over the leaves two to three times, I attach my bagger and mow once, emptying my bagger every once in awhile. This works great for me.

Ryan McCallum

I own a Navigator. After blowing the leaves out of the gardens and tight areas I run over them with the machine equipped with the mulch plug to chop them up really fine. Then I take the plug out and bag as usual. Takes a bit more time but saves a lot of space on the trailer.

Rob Robinson

Blow out all the plant beds into the lawn and suck the leaves up from there. If there are a lot of them, it’s not a bad idea to grind the leaves up a bit to cut down on the amount you have to move.

Brennan Wright

Mulch kit probably the best investment I’ve ever made.

Ryan Nicola

The JRCO leaf plow works great moves lots of leaves quick leaving a thin trail behind which can easily be vaced up with a mower or blown easily with a good back pack blower.

Daniel Lane

For individual small yards, grab the biggest, thickest tarp you can, rake and blow the leaves onto it, and move by hand or tie off to your rider for the burn pile or truck.

Bonnie Lange Salonek

Ultra Vac – just got mine and I love it!

Kenny Farrell

Mulch over them with a Lazer and bag them up with a Turf Tracer.

Though we don’t encourage this behavior, the following posts made us chuckle a bit:

Joe Caron

Hire someone to do it for me!

Brian Smith

Cut down all the trees.

Justin Monnig

I’ve got all sorts of ideas, let’s see, how about use a speed blower or buffalo blower to move ‘em into your neighbor’s yard. No bagging needed. Then sit back in a lawn chair with an alcoholic beverage as your neighbor sweeps them up.

If you have more ideas you’d like to share, feel free to leave a comment below.